Dryer lights up will not start whirlpool duet WED9150WW1

[mdniswan50]

I have tech sheet.I need advice the interface have power everything.I check all switches all good.I used 110 plug put clips  on 4 and 5 the motor runs,

[schleven]

if the thermal fuse is good, the belt switch is good, and the belt is not broken sounds like you may have a control board issue.

[mdniswan50]

How to test the control board

[schleven]

I don't know of a good way to actually test the control board. But if everything else is good. There's not a whole lot of other options left.

[mdniswan50]

IS ANY WAY A DOOR SWITCH TEST GOOD STILL NOT WORKING.I OPEN THE DOOR NO BEEP.IT TEST OUT GOOD.

[schleven]

If the door switch is bad it certainly won't start. Should be a simple continuity test on the door switch.

[mdniswan50]

It tested oK no beep open door.No clink on control board.

[OTAServ]

Most likely it’s probably the control board (on the top left of the cabinet) you mentioned that you got continuity when you tested the door switch but no beep or click when u open the door. Does the drum light come on when you open the door?  If it does that’s a good sign that the door switch is good.  If not, either you have a light bulb issue or maybe you incorrectly checked the door switch. Make sure you are checking com to nc not com to no and do it with the door closed.  But most likely it’s your control board if all other checks are good.  In my experience with these dryers it’s ALWAYS either a broken belt or bad board.