Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Bosch dishwasher SHE7ER55UC/50 CODE E09,After finished cycle  (Read 554 times)

Offline shillion

  • Technician
  • Member Since: Jan 2011
  • Posts: 423
  • Country: ca
  • I have been repairing appliances since 1983
Bosch dishwasher SHE7ER55UC/50 CODE E09,After finished cycle
« on: August 23, 2018, 04:56:24 AM »

My customer has this dw,after finishing each cycle,displays E09 code.Before starting any cycle,he has to turn off the on/off switch,turn on again, the E09 code is gone.Then it would run ext cycle fine.What does E09 mean?please help!

Offline dab147315

  • Technician
  • Member Since: Oct 2010
  • Posts: 5039
  • Country: us
Re: Bosch dishwasher SHE7ER55UC/50 CODE E09,After finished cycle
« Reply #1 on: August 23, 2018, 08:26:44 AM »
Bosch Dishwasher Error Codes
« Last Edit: August 23, 2018, 08:42:14 AM by dab147315 »

Offline shillion

  • Technician
  • Member Since: Jan 2011
  • Posts: 423
  • Country: ca
  • I have been repairing appliances since 1983
Re: Bosch dishwasher SHE7ER55UC/50 CODE E09,After finished cycle
« Reply #2 on: August 24, 2018, 03:01:54 AM »
Thank you very much dab ,with these fault codes,I have confidence to tacke this repair now.

Offline rkious1

  • Technician
  • Member Since: Oct 2018
  • Posts: 77
  • Country: us
    • K-ICE Heating and Cooling and Appliance Repair
Re: Bosch dishwasher SHE7ER55UC/50 CODE E09,After finished cycle
« Reply #3 on: February 16, 2019, 05:27:56 PM »
How did this one turn out ?

1. Heater
2. Circuit Board
3. Wiring Harness

Have not had the joy to work on this mod. yet and this inquiring mind was just wanting to know  :popcorn:
K-ICE Appliance Repair
Ross Kious
870-351-2847

Offline shillion

  • Technician
  • Member Since: Jan 2011
  • Posts: 423
  • Country: ca
  • I have been repairing appliances since 1983
Re: Bosch dishwasher SHE7ER55UC/50 CODE E09,After finished cycle
« Reply #4 on: February 17, 2019, 10:35:55 AM »
I had to replace the wash pump with the heater (the heat pump),Just as the fault code description said.