Yo, just a little update on that dishwasher that wasn't Heating. I never did put it in a diagnostic mode because I didn't get that information until after I was done, but what I done was pull the wiring off the main control board and look for any sign of a discoloration or burn which I did not find put it all back together remove the thermostat that was open and I'm still thinking that part may be bad but it closed and I put it all back together and had 220 volts during the heating cycle that I did not have before. OneNote also I've had this several times on this particular model where the unit did not respond to any command. Disrupted power to the unit for a couple minutes and it restored all function with no call back's. Thanks again guys.