Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Maytag Pump Pully  (Read 3473 times)

Offline a3kbrisk

  • VIP Member
  • Member Since: Oct 2008
  • Posts: 1
Maytag Pump Pully
« on: October 31, 2008, 10:46:35 AM »

My washer stopped spinning. I looked under the unit and the belt was in tact, but was off. The unit has a three pulley system with one belt.  However, the pulley under the Pump was completely gone, there was a round melted plastic piece under the unit. Do I have to replace the whole pump? Is this a bigger problem than meets the eye? The machine is 3 years old. I also cant get the front cover off, no screws, just 2 clips under front cover. No manual online.

Model MAV3955EWW

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Maytag PumpPully
« Reply #1 on: October 31, 2008, 11:59:53 AM »
After leaving this Earth, "Do you want the smoking or non-smoking section?"