Author Topic: Whirlpool Dishwasher GU2400XTPS6 dead? (Read 8540 times)

baxleyk1 · « **on:** October 21, 2007, 08:08:04 PM »

Hi! First post here... My Whirlpool dishwasher won't start. When I try the diagnostic cycle, it cycles through fine, then once the diagnostic is done, it still won't start. It shows the two dashes in the display indicating a door problem; I took it apart and couldn't find anything obviously wrong with the latch or other door components. I even cleaned the micro switch contacts with no results. Any ideas?

Model Number: GU2400XTPS6

Pegi · « **Reply #1 on:** October 21, 2007, 08:22:08 PM »

It shows the two dashes in the display indicating a door problem

check your door switches...

Pegi · « **Reply #2 on:** October 21, 2007, 08:30:49 PM »

TECH SHEET

rickgburton · « **Reply #3 on:** October 22, 2007, 10:15:40 PM »

Check both switches using an ohm meter. There is also a thermal electronic fuse behind the control panel you should check.
Door Switch # 8269209 (2)
Thermal fuse # 8269213

Get Answers to your Appliance Repair Questions

ApplianceJunk.com

Appliance Repair Forum