Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Installing a new stainless steel front panel  (Read 3248 times)

Offline madgearooch

  • VIP Member
  • Member Since: Oct 2008
  • Posts: 4
Installing a new stainless steel front panel
« on: October 23, 2008, 05:43:53 PM »

I am looking for a schematic of how to replace the door panel on my Kenmore Dishwasher.  I don't want to remove more screws that I have too.  I have a new panel, the old one got is scracthed, and I just bought the unit less tahn 1 year ago.

Model 665.13843k601

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8827
  • Country: us
  • Caregiver, DIYer
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Installing a new stainless steel front panel
« Reply #1 on: October 23, 2008, 09:08:12 PM »
I used to deliver them years ago and it seemed to me like you removed the top screws on the molding and removed the molding and the front panel would slide upwards. There would be 4 different colors to go with. 2 panels mounted in the door that were reversable. Just slide out the old and insert the new and put the top moulding back on.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair