Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Maytag Washer  (Read 5270 times)

Offline jpk1950

  • VIP Member
  • Member Since: Oct 2008
  • Posts: 2
Maytag Washer
« on: October 19, 2008, 07:38:29 PM »

Washer is leaking between the tub and the transmission.  I am unable to completely disassemble the machine and can not locate manual online.  I am unable to separate the inner tub from the other tub.  

Can anyone help?  Thanks in advance.


Model A382 (series 04)

Offline theoldstoveguy

  • Technician
  • Member Since: Jan 2008
  • Posts: 1635
  • Country: us
    • Buy me a beer through paypal
Re: Maytag Washer
« Reply #1 on: October 19, 2008, 09:13:17 PM »
Sounds like a stem kit & bearing kit are needed.22204012 Stem kit & 204013 bearing.You may need special tools to install.A spanner wrench.

Offline jpk1950

  • VIP Member
  • Member Since: Oct 2008
  • Posts: 2
Re: Maytag Washer
« Reply #2 on: October 19, 2008, 09:46:31 PM »
Thanks! 

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3023
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Maytag Washer manual
« Reply #3 on: October 20, 2008, 07:13:07 AM »
The manual is also on the website HERE



« Last Edit: October 20, 2008, 07:16:12 AM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline magician59

  • Technician
  • Member Since: Aug 2007
  • Posts: 151
Re: Maytag Washer
« Reply #4 on: November 14, 2008, 04:17:00 PM »
A pro can do this job in about 45 minutes. If you have never done it, and you don't have the spanner wrench required, be sure to pack a lunch.