Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Remove agitator to change clutch rusted is worth going any farther?  (Read 350 times)

Offline mdniswan50

  • VIP Member
  • Member Since: Dec 2015
  • Posts: 170

I have 2 pics

Offline Bailey

  • Technician
  • Member Since: Dec 2011
  • Posts: 809
  • Country: us
Re: Remove agitator to change clutch rusted is worth going any farther?
« Reply #1 on: July 17, 2017, 08:30:42 AM »
It is hard to tell what you are working on from the picture. What is the brand and model number?

Offline mdniswan50

  • VIP Member
  • Member Since: Dec 2015
  • Posts: 170
Re: Remove agitator to change clutch rusted is worth going any farther?
« Reply #2 on: July 17, 2017, 03:59:14 PM »
Kenmore 110-22292100 I put new coupler on the leaving cloths wet.I pulled out old transmission clutch was tight.I have another transmission from another washer should put in.The rust is all way thru.I am sending new pic

Offline mdniswan50

  • VIP Member
  • Member Since: Dec 2015
  • Posts: 170
Re: Remove agitator to change clutch rusted is worth going any farther?
« Reply #3 on: July 17, 2017, 07:14:18 PM »
I open up lid by pass lid switch on not moving fast enough to remove all the water