Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Samsung Dryer model# DV48H7400EW/A2) won't spin/heat  (Read 514 times)

Offline dvalentine

  • VIP Member
  • Member Since: Jun 2017
  • Posts: 2
Samsung Dryer model# DV48H7400EW/A2) won't spin/heat
« on: June 14, 2017, 01:12:14 AM »

My Samsung dryer (DV48H7400EW/A2) stopped working today.  When I turn it on the filter light flashes 5 times.  I cleaned out the whole thing and it discharges outside 1 foot away from the dyer so I know there isn't a clog filter line.  Additionally if I run it on a time cycle, the timer will count down for 3 minutes then skip all the way to 1 minute and then finish.  No spinning or heating during that time.  My research says it could be a thermal fuse or the moisture sensor.  Any advice on how to determine whats going on.   

Offline dvalentine

  • VIP Member
  • Member Since: Jun 2017
  • Posts: 2
Re: Samsung Dryer model# DV48H7400EW/A2) won't spin/heat
« Reply #1 on: June 14, 2017, 05:32:10 PM »
So on this type of Samsung the check lint filter light always flashes when you turn it on.  After a tear-down I discovered that the belt pulley was locked up and the belt destroyed it.  Replaced both for about $70 and its working great again.