Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: LG WM3370HWA Front Load Washer - Loud Thumping, unbalanced drum during spin  (Read 8268 times)

Online Thorning

  • Technician
  • Member Since: Jun 2013
  • Posts: 792
Re: LG WM3370HWA Front Load Washer - Loud Thumping, unbalanced drum during spin
« Reply #20 on: November 15, 2019, 02:21:19 PM »

What a crappy design. Hope you get this one back together but I would take it to the junk pile and get a more reliable unit such as a Speed Queen top load.

Offline JarfGartz

  • VIP Member
  • Member Since: Mar 2019
  • Posts: 3
Re: LG WM3370HWA Front Load Washer - Loud Thumping, unbalanced drum during spin
« Reply #21 on: November 15, 2019, 04:59:18 PM »
Yep, the washers worked like a charm - the machine is still operating well and it's been several months. One of the mounting pegs had broken off on the initial breakdown, but the washers on the remaining 3 mounting pegs are holding it on just fine. Glad I didn't call a repair guy or replace the unit with a new one! Saved some money for sure :)

Offline snowryder

  • VIP Member
  • Member Since: Nov 2019
  • Posts: 2
Re: LG WM3370HWA Front Load Washer - Loud Thumping, unbalanced drum during spin
« Reply #22 on: November 18, 2019, 09:08:48 AM »
Yep, the washers worked like a charm - the machine is still operating well and it's been several months. One of the mounting pegs had broken off on the initial breakdown, but the washers on the remaining 3 mounting pegs are holding it on just fine. Glad I didn't call a repair guy or replace the unit with a new one! Saved some money for sure :)
JarfGartz, great to hear.  I ended up putting washers in as well. 20 cents a washer, for an 80 cent fix.  I was not looking forward to replacing the hub cover. I was able to wash a few loads of blankets and it seemed to be ok.  Cross my fingers!

Offline JarfGartz

  • VIP Member
  • Member Since: Mar 2019
  • Posts: 3
Re: LG WM3370HWA Front Load Washer - Loud Thumping, unbalanced drum during spin
« Reply #23 on: November 18, 2019, 09:31:31 PM »
Great to hear! Good luck to us! :)

Offline Transitman1

  • VIP Member
  • Member Since: Dec 2019
  • Posts: 1
Re: LG WM3370HWA Front Load Washer - Loud Thumping, unbalanced drum during spin
« Reply #24 on: December 14, 2019, 10:01:19 PM »
Just to keep this thread alive as the LG nightmare does not seem to be going away.  I had the same experience with my LG WM3570HWA.  There was enough information on this thread to give me the courage to take a look under the hood.  What I found was just like everyone else, my bottom counter weight on the washer floor.  I did not replace with washers but just made the bolts very tight and added loctite.  I have had this washer for 3 years brand new and it has always made some type of noise during the spin cycle.  Recently the sound has become much worse, our machine is on our second floor and I swore it was coming through the ceiling.  It also grew legs and walked around our laundry room.  Long story long, this reattachment of the weight fixed everything (makes me think the weight was never properly on the machine from the store), prevented a service call or new purchase and the machine has never ran so quietly!  Thanks to everyone that posted this similar problem and the the solution!

Offline dab147315

  • Technician
  • Member Since: Oct 2010
  • Posts: 5250
  • Country: us
Re: LG WM3370HWA Front Load Washer - Loud Thumping, unbalanced drum during spin
« Reply #25 on: December 15, 2019, 09:00:31 AM »
Page 31 seems to have a service bulletin for this.

Offline Dreadneck

  • VIP Member
  • Member Since: Apr 2020
  • Posts: 1
The weight just fell off of mine last night during high spin. Sounded like a truck ran into the side of the house. Popped the gasket off, lo and behold, there was the weight sitting on the bottom. Thanks all for posting pics and info. Helped a great deal!

Offline Dash

  • Technician
  • Member Since: Sep 2015
  • Posts: 28
I've been a service tech for 40 years and have had numerous LG front-load washers with unattached lower counter-weight.  More often the solution was to replace the front outer tub if half or all of the split bosses have broken off.  If the bosses are mostly intact, you can remove the front outer tub, drill 4 holes through the plastic, and use a stainless steel nut and bolt with a thin rubber gasket under the bolt head.  Bolt head must be low profile.