Author Topic: No Hot Water (Read 1139 times)

app1 · « **on:** April 21, 2017, 08:49:52 AM »

Have a Whirlpool washer Model # WTW5560SQO and we can only get hot water - bad water valve or temperature switch is my guess and is there a way to test the temp switch? Thanks for any help!!!!!

app1 · « **Reply #1 on:** April 21, 2017, 08:51:22 AM »

Sorry , I meant to say we only get Cold Water!!! I'm sorry!

vunger1 · « **Reply #2 on:** April 22, 2017, 05:42:53 PM »

Check for 120vac at the Hot water valve should be a red wire and a white wire, if you have voltage then bad valve

app1 · « **Reply #3 on:** April 27, 2017, 01:13:09 PM »

Sorry it took so long to respond but thanks for the advice. It turned out to be the temp switch!! All is well now.

RufusFer · « **Reply #4 on:** April 28, 2017, 11:04:53 AM »

Quote from: app1 on April 27, 2017, 01:13:09 PM

Sorry it took so long to respond but thanks for the advice. It turned out to be the temp switch!! All is well now.

Same problem here, how do you change the temp switch up?

rubyatiy · « **Reply #5 on:** January 14, 2019, 06:42:14 AM »

Quote from: RufusFer on April 28, 2017, 11:04:53 AM

Quote from: app1 on April 27, 2017, 01:13:09 PM
Sorry it took so long to respond but thanks for the advice. It turned out to be the temp switch!! All is well now.

Same problem here, how do you change the temp switch up?

Check the main forum page you will get your answers cheers

bathmate28 · « **Reply #6 on:** February 16, 2019, 10:07:06 AM »

i think this is very interesting discussion . thanks
Bathmate Hydro Pump

CaseyAvery · « **Reply #7 on:** May 22, 2019, 07:59:14 PM »

Quote from: RufusFers on October 09, 2419, 03:51:33 AM

Same problem here, how do you change the temp switch up?

the problem probably lies within your water heater.

Get Answers to your Appliance Repair Questions

ApplianceJunk.com

Appliance Repair Forum