Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Dryer error code E61 after replacing heating element  (Read 674 times)

Offline airbendr

  • Technician
  • Member Since: Jan 2014
  • Posts: 17
Dryer error code E61 after replacing heating element
« on: April 11, 2017, 04:59:23 PM »

 :(
replaced heater Frigidair fase7073nwo

unit codes out about 5 minutes ,, does work on low heat.

Offline dab147315

  • Technician
  • Member Since: Oct 2010
  • Posts: 4449
  • Country: us
« Last Edit: April 11, 2017, 08:50:03 PM by dab147315 »

Offline airbendr

  • Technician
  • Member Since: Jan 2014
  • Posts: 17
Re: Dryer error code E61 after replacing heating element
« Reply #2 on: April 11, 2017, 09:12:12 PM »
 :thanks:  dab147315

printed it  ;D hoping some one would say Oh yeah this happens all the time, just do this,,,,,

oh wait that's what the tek sheets for  ;)
k

Offline dab147315

  • Technician
  • Member Since: Oct 2010
  • Posts: 4449
  • Country: us
Re: Dryer error code E61 after replacing heating element
« Reply #3 on: April 11, 2017, 10:30:15 PM »
134792700  Three coils in the heating element as you know and if all the wiring is good you are probably looking at a control board. FYI most of the time there is a wiring diagram on the last page of the parts list on these  Frigidaire look ups.

Offline dab147315

  • Technician
  • Member Since: Oct 2010
  • Posts: 4449
  • Country: us
Re: Dryer error code E61 after replacing heating element
« Reply #4 on: April 16, 2017, 08:45:26 AM »
Any update?