Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: kenmore dishwasher problem  (Read 405 times)

Offline lunyty

  • VIP Member
  • Member Since: Feb 2017
  • Posts: 1
kenmore dishwasher problem
« on: February 06, 2017, 11:34:13 AM »

I have a kenmore dishwasher model#587.15253402,made by frigidaire,,id had a drain pump fail so i replaced the pump 154580301 and when i hooked it all back up,i have High Temp and Heat Dry lights flashing.....i pushed  the heat dry and start/cancel light ,but the lights will not stop flashing ...the door switch tested good,the power wires are tight,,What the hell is going on here,i just replaced the drain pump ??

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 10950
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: kenmore dishwasher problem
« Reply #1 on: March 22, 2017, 08:21:42 AM »
Did you ever figure it out?