Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: repair  (Read 1733 times)

Offline 71scruggs

  • VIP Member
  • Member Since: Nov 2016
  • Posts: 4
repair
« on: November 30, 2016, 07:43:41 AM »

my washer is not running the cycle it sensing takes a long time and it does not spin or agitate or release the water for a long time please help

Offline Maintech

  • Technician
  • Member Since: Mar 2014
  • Posts: 178
  • Country: us
  • LNM Service and Repair LLC.
    • Buy me a beer through paypal
Re: repair
« Reply #1 on: November 30, 2016, 03:06:26 PM »
need a brand and model number to even begin to help

Offline 71scruggs

  • VIP Member
  • Member Since: Nov 2016
  • Posts: 4
Re: repair
« Reply #2 on: November 30, 2016, 03:10:07 PM »
Maytag Bravos
Mvwx600BW0

Offline dab147315

  • Technician
  • Member Since: Oct 2010
  • Posts: 5256
  • Country: us
Re: repair
« Reply #3 on: December 01, 2016, 08:49:22 AM »
You have to check for error codes first.Here how and a tech sheet below of your washer.
https://www.youtube.com/watch?v=VZoCjjguxRI

Offline 71scruggs

  • VIP Member
  • Member Since: Nov 2016
  • Posts: 4
Re: repair
« Reply #4 on: December 01, 2016, 12:27:12 PM »
This is for BMW not mvwx600bw0

Offline scrapiron

  • Technician
  • Member Since: Nov 2011
  • Posts: 726
  • Country: us
  • Service Tech Since 1974
Re: repair
« Reply #5 on: December 01, 2016, 12:32:48 PM »
The mvwx600bw0 IS a VMW platform washer. Use the information provided to check for any stored error codes.

Offline 71scruggs

  • VIP Member
  • Member Since: Nov 2016
  • Posts: 4
Re: repair
« Reply #6 on: December 08, 2016, 11:48:19 AM »
im receiving motor codes  F7-E5,F7-E6 but its hard to determine i think it might be actuator please help i might not of put the codes in correctly