Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Kenmore frontload #11047532604 washer  (Read 2718 times)

Offline Matzie66

  • Technician
  • Member Since: Jan 2016
  • Posts: 155
  • Country: ca
Kenmore frontload #11047532604 washer
« on: October 09, 2016, 11:32:20 AM »

Display shows 37 minutes for start of every cycle. Main control & user interface control have been replaced.

Offline scrapiron

  • Technician
  • Member Since: Nov 2011
  • Posts: 726
  • Country: us
  • Service Tech Since 1974
Re: Kenmore frontload #11047532604 washer
« Reply #1 on: October 11, 2016, 11:25:16 AM »
Look at the tech sheet and enter diagnostics. Check for stored error codes and post what you find out. Also, just a wild guess here, unplug the MI3 connector from either the main control or the motor control and try selecting cycles. If the times become normal, suspect the motor control board. The MI3 cable is the serial communication link between the 2 boards.

Offline Matzie66

  • Technician
  • Member Since: Jan 2016
  • Posts: 155
  • Country: ca
Re: Kenmore frontload #11047532604 washer
« Reply #2 on: October 11, 2016, 05:33:14 PM »
Hi
  The only stored error code was F24 but it was never seen on display.Motor board was replaced awhile back

Offline ido

  • VIP Member
  • Member Since: Jul 2010
  • Posts: 3
  • Country: ca
Re: Kenmore frontload #11047532604 washer
« Reply #3 on: October 16, 2016, 02:38:33 PM »
The F24 error code indicates a water temperature sensor reading that is out of range on this model of washer.  Unplug the washer for AT LEAST 30 minutes to reset the Central Control Unit (CCU).Check the wiring connections between the temperature sensor and the control board. The temperature sensor is at the back of the tub, you will need to unplug the washer and remove the back panel to access it.

Offline Matzie66

  • Technician
  • Member Since: Jan 2016
  • Posts: 155
  • Country: ca
Re: Kenmore frontload #11047532604 washer
« Reply #4 on: October 17, 2016, 08:42:50 AM »
Hi
  I will have a temp. sensor & a motor board for this one.The minutes problem came shortly after the motor board was replaced.