Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Whirlpool washer WTW 4959XW0  (Read 1162 times)

Offline mdniswan50

  • VIP Member
  • Member Since: Dec 2015
  • Posts: 248
Whirlpool washer WTW 4959XW0
« on: June 13, 2016, 05:58:50 PM »

Data sheet missing.Plug in sensing green light on the lid switch red light on,I press start sound like start to work then only lid lock flashing.Any hope for this junk.

Offline przemeku6

  • Technician
  • Member Since: May 2012
  • Posts: 43
  • Country: us
    • ACE APPLIANCE
Re: Whirlpool washer WTW 4959XW0
« Reply #1 on: June 17, 2016, 10:20:25 PM »
lid lock failure to latch.
part W10404050
STAN

Offline anerepair

  • Technician
  • Member Since: Sep 2016
  • Posts: 57
Re: Whirlpool washer WTW 4959XW0
« Reply #2 on: September 09, 2016, 02:56:10 PM »
If the lid lock starts to flash it means an error has occurred, it could be anything.  Your best bet is to go into diags and check the stored codes.  This is the left, right, right, right, left, right entry method.  Then turn dial until cycle complete is lit, press start, turn dial once clockwise and that is your first code.  Codes are tricky on this because there is no display so it will be flashing two sets of the progress leds.  What is the flash?