Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Whirlpool VMF Model 110.21102011  (Read 1222 times)

Offline Joey Bullock

  • VIP Member
  • Member Since: Jul 2014
  • Posts: 203
Whirlpool VMF Model 110.21102011
« on: June 01, 2016, 10:40:06 AM »

This machine starts and runs until the Lid Lock light starts flashing and then goes out.  The Lid Lock Switch appears to be good and checks good.  Any idea on which way to proceed?  Where can I get a tech sheet for further troubleshooting?  Thanks, Joey.

Offline Joey Bullock

  • VIP Member
  • Member Since: Jul 2014
  • Posts: 203
Re: Whirlpool VMF Model 110.21102011
« Reply #1 on: June 01, 2016, 10:41:50 AM »
Oops. Whirlpool VMW. 

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 10983
  • Country: us
    • ApplianceJunk.com - Appliance Repair

Offline anerepair

  • Technician
  • Member Since: Sep 2016
  • Posts: 57
Re: Whirlpool VMF Model 110.21102011
« Reply #3 on: September 09, 2016, 03:17:23 PM »
Use the tech sheet in thread to go into diags and check for the errors.  This will help you immensely.  Once you get into diags turn the dial once clock wise, you will see cycle complete lit.  Then press start and go once more clockwise.  This will be your most recent error, unit will store up to 4.  Let us know what your codes are.  We can get you fixed once we have the codes. 

Offline Joey Bullock

  • VIP Member
  • Member Since: Jul 2014
  • Posts: 203
Re: Whirlpool VMF Model 110.21102011
« Reply #4 on: October 11, 2016, 10:14:49 PM »
I finally deciphered the error codes and determined the machine was having an intermittent problem spinning.  I replaced the actuator and fixed the problem.  Tks for the help.