Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: SAMSUNG WA5451ANW/XAA WASHER WILL NOT COMPLETE CYCLE  (Read 1212 times)

Offline applianceman3144

  • VIP Member
  • Member Since: Nov 2010
  • Posts: 14
SAMSUNG WA5451ANW/XAA WASHER WILL NOT COMPLETE CYCLE
« on: April 04, 2016, 02:41:24 PM »

Washer runs through the cycle to less than ten minutes left, will go through final rinse but then resets and starts the final rinse.  It will not go into final spin.  We have replaced the machine control board with no change.  Any ideas?

Offline Rick32k

  • Technician
  • Member Since: May 2012
  • Posts: 249
  • Country: us
Re: SAMSUNG WA5451ANW/XAA WASHER WILL NOT COMPLETE CYCLE
« Reply #1 on: April 05, 2016, 11:35:06 AM »
hall sensor

Offline applianceman3144

  • VIP Member
  • Member Since: Nov 2010
  • Posts: 14
Re: SAMSUNG WA5451ANW/XAA WASHER WILL NOT COMPLETE CYCLE
« Reply #2 on: April 18, 2016, 04:27:38 PM »
You were spot on with the hall sensor.  Sorry for taking so long to get beck to you, Samsung kept sending us the wrong sensor.  :thanks:

Offline Rick32k

  • Technician
  • Member Since: May 2012
  • Posts: 249
  • Country: us
Re: SAMSUNG WA5451ANW/XAA WASHER WILL NOT COMPLETE CYCLE
« Reply #3 on: April 18, 2016, 07:31:20 PM »
Sweet! Guess I got some use, lol