Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Dishwasher Kenmore 665.15114K214 won't start  (Read 2118 times)

Offline pumps

  • VIP Member
  • Member Since: Oct 2014
  • Posts: 2
Dishwasher Kenmore 665.15114K214 won't start
« on: January 19, 2016, 10:01:35 PM »

A buddy called me who lives a ways away. His dishwasher won't start. Set the controls and it lights up but doesn't start. I got him to check to see if there is power to the water valve but nothing. No begin cycle pump out. Float switch ok. I'm thinking some control panel thing but won't be able to get out there for a week or so. Ideas?

Offline lesguns

  • Technician
  • Member Since: Aug 2011
  • Posts: 156
  • Country: us
Re: Dishwasher Kenmore 665.15114K214 won't start
« Reply #1 on: January 24, 2016, 09:49:08 PM »
child lock?

Offline pumps

  • VIP Member
  • Member Since: Oct 2014
  • Posts: 2
Re: Dishwasher Kenmore 665.15114K214 won't start
« Reply #2 on: January 27, 2016, 02:05:21 PM »
No on the child lock. After some reading I decided it might be the door switch.  Not that either. I was able to look at the tech sheet and see a fuse on the electronic control. Non-replaceable. It was open when I metered the pin outs on the board. Now , why is it open?