Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Roper washer wouldn't agitate after filling.  (Read 1323 times)

Offline aben

  • VIP Member
  • Member Since: Oct 2015
  • Posts: 56
Roper washer wouldn't agitate after filling.
« on: November 19, 2015, 06:58:47 PM »

Roper washer rax4232kq1 wouldn't start agitating after filling with water. All your help is welcome!!!

Offline aben

  • VIP Member
  • Member Since: Oct 2015
  • Posts: 56
Re: Roper washer wouldn't agitate after filling.
« Reply #1 on: November 19, 2015, 07:25:11 PM »
interested in finding the Repair manual For this Washer. Can't find it in the google drive
« Last Edit: November 19, 2015, 07:25:56 PM by aben »

Offline DaleCaskanette

  • Technician
  • Member Since: Dec 2013
  • Posts: 250
  • Country: ca
Re: Roper washer wouldn't agitate after filling.
« Reply #2 on: November 19, 2015, 07:57:09 PM »
probably water level switch

Offline rbmappltech

  • Technician
  • Member Since: Jun 2014
  • Posts: 171
  • Country: us
Re: Roper washer wouldn't agitate after filling.
« Reply #3 on: November 19, 2015, 09:03:39 PM »
Check lid switch

Offline dab147315

  • Technician
  • Member Since: Oct 2010
  • Posts: 5155
  • Country: us
Re: Roper washer wouldn't agitate after filling.
« Reply #4 on: November 19, 2015, 11:05:06 PM »
Like the man says check lid switch and if thats ok check connections down by motor.Washer will fill with water and if lid switch is bad no agitation or spin.Here is the Tech.Sheet.Let us now what is wrong.

Offline aben

  • VIP Member
  • Member Since: Oct 2015
  • Posts: 56
Re: Roper washer wouldn't agitate after filling.
« Reply #5 on: November 22, 2015, 04:12:44 PM »
Thanks. It was a faulty lid switch. Thanks again for your input.

Offline dab147315

  • Technician
  • Member Since: Oct 2010
  • Posts: 5155
  • Country: us
Re: Roper washer wouldn't agitate after filling.
« Reply #6 on: November 22, 2015, 04:14:12 PM »
Thanks for letting us know. :thanks: