Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: GE Dishwasher  (Read 4800 times)

Offline MajorApp

  • Technician
  • Member Since: Feb 2008
  • Posts: 629
  • Country: us
GE Dishwasher
« on: September 10, 2008, 02:46:37 PM »

 The machine wouldn't pump out. The customer tried to fix it. He noticed a burnt wire on the drain solenoid and replaced the solenoid and drain pump and it still didn't work. I got the pump to work but the solenoid stays on after the pump turns off. What next? The tech sheets were not with the machine.

Model GSD5360F00SS

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8827
  • Country: us
  • Caregiver, DIYer
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: GE Dishwasher
« Reply #1 on: September 10, 2008, 08:18:43 PM »
chicken bone in the solenoid flap?
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair

Offline MajorApp

  • Technician
  • Member Since: Feb 2008
  • Posts: 629
  • Country: us
Re: GE Dishwasher
« Reply #2 on: September 10, 2008, 11:16:10 PM »
 Does anyone have the schematics or repair manual for this model?

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 10955
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: GE Dishwasher
« Reply #3 on: September 10, 2008, 11:38:08 PM »
I have searched high and low, but can not seem to find a schematics or repair manual for this model.

Maybe someone else will have better luck then I did in finding you one.

I don't work on many G.E. dishwashers myself so I don't have a whole lot of experience to offer you on this one, sorry.

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3023
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: GE Dishwasher
« Reply #4 on: September 11, 2008, 06:51:35 AM »
The sequence switch is bad, most likely. Part number for this model: WD21X10018
« Last Edit: September 11, 2008, 06:53:33 AM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline MajorApp

  • Technician
  • Member Since: Feb 2008
  • Posts: 629
  • Country: us
Re: GE Dishwasher
« Reply #5 on: September 11, 2008, 09:02:18 AM »
 I was thinking it was the control panel because the drain pump completes the cycle and shuts off. Is that wrong?