Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Lg tromm want spin need help  (Read 1479 times)

Offline Twditmore

  • VIP Member
  • Member Since: Sep 2015
  • Posts: 1
Lg tromm want spin need help
« on: September 23, 2015, 12:25:29 PM »

Model 4wm2277hs
I replaced the pcm and now I am getting the LE code drum acts like it wants to spin. However it want have run the no spin cycle already checked all the wires all seem fine ohms out good. Washer sat for a while I bought it as a set knowing it needed a pcm.
Any help would be greatly appreciated
Thanks
Tim

Offline dab147315

  • Technician
  • Member Since: Oct 2010
  • Posts: 5162
  • Country: us
Re: Lg tromm want spin need help
« Reply #1 on: September 23, 2015, 01:37:03 PM »
Here is a service manual.Have you check the hall sensor? https://drive.google.com/file/d/0B-i5KqMA2RZwY09qa2ctNmRickU/view?usp=sharing
« Last Edit: September 23, 2015, 01:37:21 PM by dab147315 »

Offline rbmappltech

  • Technician
  • Member Since: Jun 2014
  • Posts: 172
  • Country: us
Re: Lg tromm want spin need help
« Reply #2 on: September 23, 2015, 07:57:14 PM »
 Also check the bolt that holds stator and rotor together, sometimes the bolt becomes loose.

Offline domain

  • Technician
  • Member Since: Nov 2012
  • Posts: 2610
  • Country: us
    • Buy me a beer through paypal
Re: Lg tromm want spin need help
« Reply #3 on: September 23, 2015, 08:12:23 PM »
Check bolt, if wiring ok hall sensor is likely if first digit of serial is 8 or lower O0 O0

Offline wildimaginations

  • Technician
  • Member Since: Jul 2011
  • Posts: 714
  • Country: us
Re: Lg tromm want spin need help
« Reply #4 on: September 28, 2015, 08:58:37 AM »
T
Model 4wm2277hs
I replaced the pcm and now I am getting the LE code drum acts like it wants to spin. However it want have run the no spin cycle already checked all the wires all seem fine ohms out good. Washer sat for a while I bought it as a set knowing it needed a pcm.
Any help would be greatly appreciated
Thanks
Tim


Tim, you're English grammar is terrible.  i don't know what you're trying to say.
Appliance Service Technician
Authorized servicer on LG appliances.
About 45 mins east of San Francisco