Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Maytag centennial commercial technology washer  (Read 4532 times)

Offline Rae10e

  • VIP Member
  • Member Since: Jul 2015
  • Posts: 8
Maytag centennial commercial technology washer
« on: July 01, 2015, 09:50:20 PM »

I need help!!

 My washer was working fine; however this last wash it filled with water and it won't drain; won't spin.. Won't do anything besides fill up with more water.   Model # cy4221310

What could it be? 

I tried plugging it in a different socket; nothing.

The water will work if I put it from small to med or large cycle; but when I pull it out; reset it to wash; nothing happens to the agitator or noise. Not even a sound. No spin/agitate. Nothing. No sound of motor.

Is the agitator broken? Or motor?

 And how do I drain the water; I have clothes in it ?!?

Please help.
« Last Edit: July 01, 2015, 09:55:08 PM by Rae10e »

Offline dab147315

  • Technician
  • Member Since: Oct 2010
  • Posts: 5174
  • Country: us
Re: Maytag centennial commercial technology washer
« Reply #1 on: July 01, 2015, 09:52:49 PM »
Need to post your model number.

Offline Rae10e

  • VIP Member
  • Member Since: Jul 2015
  • Posts: 8
Re: Maytag centennial commercial technology washer
« Reply #2 on: July 01, 2015, 09:59:17 PM »
Need to post your model number.


Ummm  is this it?

Type 111-07.  Cy4221310. Or

MVWC300vw1

Offline Rae10e

  • VIP Member
  • Member Since: Jul 2015
  • Posts: 8
Re: Maytag centennial commercial technology washer
« Reply #3 on: July 01, 2015, 10:06:24 PM »
I just tried again and it made a hmmm sound then it stopped.  But no movement spinning.. And the dial doesn't turn and finish cycle either

Offline fairbank56

  • Technician
  • Member Since: Aug 2012
  • Posts: 529
  • Country: us
Re: Maytag centennial commercial technology washer
« Reply #4 on: July 02, 2015, 08:15:03 AM »

  Sounds like a lid switch problem. Check for loose screws on the left side lid hinge. This hinge activates the hidden lid switch. If they are tight, then open the control panel and test the lid switch on the left side.

Eric

Offline Rae10e

  • VIP Member
  • Member Since: Jul 2015
  • Posts: 8
Re: Maytag centennial commercial technology washer
« Reply #5 on: July 02, 2015, 09:58:15 AM »
Is there a way to reset the washer?!   It makes a hmm sound for a few seconds then it goes away and nothing happens. 

Why don't it drain; if I put it on to spin?

Offline fairbank56

  • Technician
  • Member Since: Aug 2012
  • Posts: 529
  • Country: us
Re: Maytag centennial commercial technology washer
« Reply #6 on: July 02, 2015, 10:11:09 AM »

  This is not an electronically controlled washer so no reset function. There may be something in the drain pump preventing the motor from running. The motor has a thermal overload that will trip and then reset itself when it cools off. Take the cabinet off, pull the pump off the motor, bypass the lid switch and then try spin again. You can drain most of the water by pulling the drain hose from the wall standpipe, place the end in a bucket and then lower it to the floor and the water should start draining into the bucket.

Eric

Offline Rae10e

  • VIP Member
  • Member Since: Jul 2015
  • Posts: 8
Re: Maytag centennial commercial technology washer
« Reply #7 on: July 02, 2015, 03:04:22 PM »
Ok, so took off cabinet.   Do I disconnect pump on the very bottom of the washer, or do I disconnect the pump that's going to the wall to drain?

Offline Rae10e

  • VIP Member
  • Member Since: Jul 2015
  • Posts: 8
Re: Maytag centennial commercial technology washer
« Reply #8 on: July 02, 2015, 03:05:32 PM »
Disconnect these two black hoses?  There is a lot of water in the washer with clothes.

Offline app1

  • Technician
  • Member Since: Aug 2011
  • Posts: 262
Re: Maytag centennial commercial technology washer
« Reply #9 on: July 02, 2015, 03:19:25 PM »
Something in the pump more than likely, Tip the washer back at an angle as far as you can without it sliding all the way to the floor before you remove the two hoses as this will cut down on the water spilling out. remove the two clips holding the pump on , then remove the hoses and look inside the pump and you will be surprised at what you may fins, usually a childs sock or something small. Like fairbanks56 said keep the bucket close to the end of the hoses!

Offline Rae10e

  • VIP Member
  • Member Since: Jul 2015
  • Posts: 8
Re: Maytag centennial commercial technology washer
« Reply #10 on: July 02, 2015, 04:45:58 PM »
Yes!! There's a sock!!!   Ughhghhh, the washer does eat socks!!!



Offline Rae10e

  • VIP Member
  • Member Since: Jul 2015
  • Posts: 8
Re: Maytag centennial commercial technology washer
« Reply #11 on: July 02, 2015, 04:47:46 PM »
I've tried to get the sock fabric by fabric.  .. It's impossible.

Where can I get one locally?!  I need my washer tonight up and running?  I'm in tempe, az

Offline johnboy3

  • Technician
  • Member Since: Nov 2012
  • Posts: 335
  • Country: us
Re: Maytag centennial commercial technology washer
« Reply #12 on: July 02, 2015, 07:12:20 PM »
Search Appliance parts, Tempe, AZ. You'll find them listed there.