Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Maytag Neptune washer won't finish spin cycle- model mah5500bww  (Read 1600 times)

Offline tcape

  • VIP Member
  • Member Since: Jun 2009
  • Posts: 81

The lady says it will start the spin cycle and say 11 minutes left and starts to spin, but then just hangs after a short spin cycle and never seems to finish. The time left to finish the spin cycle can vary she says. Where should I start?

Offline deekin

  • Technician
  • Member Since: Jul 2013
  • Posts: 192
  • Country: us
Re: Maytag Neptune washer won't finish spin cycle- model mah5500bww
« Reply #1 on: May 20, 2015, 10:22:00 PM »
Start with the tub displacement switches, lower and top of tub switches will usually have ohm readings when either are "sticking". If those check ok, move to door latch assembly, sometimes the spring on left side lock lever will rust/break and reek havok.