Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: RS2466CW1 Display on viking range  (Read 4697 times)

Offline 66carlos66

  • Technician
  • Member Since: Jun 2008
  • Posts: 12
  • Country: ca
RS2466CW1 Display on viking range
« on: August 19, 2008, 01:45:11 AM »

the display on my range just doesn't make sense, keep blinking . I tried to set the time .
no luck. .last night we didn't any power in the whole house for about 1/2 hour  . did the circuit board got fried ? everything else work.
can you guys  help ?   carlos 8)

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3023
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Display on viking range
« Reply #1 on: August 19, 2008, 07:36:27 AM »
If pressing Cancel does not affect the display, try turning off the breaker one more time to see if this clears up. If not replace the board.
« Last Edit: August 19, 2008, 07:43:28 AM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

Offline 66carlos66

  • Technician
  • Member Since: Jun 2008
  • Posts: 12
  • Country: ca
Re: Display on viking range
« Reply #2 on: August 19, 2008, 09:00:28 PM »
thank u ,  repair-man  I did what  u said  (Braeker on-off) and  still blinking making no sense .  so i decide to take out the stove and  open it-up , looks good to me. no burn mark or scraths.  so I spray lot of   ELECTRICAL CONTAC CLEANER all over the circuit board and let it dried. now works perfect. , for how long is going to work ??  any input of what was the problem.?

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3023
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Display on viking range
« Reply #3 on: August 20, 2008, 06:30:22 AM »
Heh-heh....sure it does.

Let's see how long this keeps up :)
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com