Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: GE washer mdl# WJRR4170E1WW Multiple Problems  (Read 1087 times)

Offline gassmann

  • VIP Member
  • Member Since: Mar 2015
  • Posts: 2
GE washer mdl# WJRR4170E1WW Multiple Problems
« on: March 04, 2015, 02:40:13 AM »

The timer runs continuously unless push-to-stop is enabled ( even then it still sounds like it's running ), also as it's running through all cycles it does not drain or spin. Help please  :-\

Offline rockinrobin

  • Technician
  • Member Since: Sep 2011
  • Posts: 460
  • Country: us
    • Buy me a beer through paypal
    • Ransom Mobile Appliance Repair Service
Re: GE washer mdl# WJRR4170E1WW Multiple Problems
« Reply #1 on: March 07, 2015, 04:51:45 PM »
Everything could be related to either a Shorted/Grounded Wire on the Timer Harness or the Timer itself (look for burnt mark's on the Wire Harness and on the Timer terminal pins).
If you order the Timer or any other part's from site below and it doesn't resolve your issue then you can return it for a full refund.
http://www.appliancepartspros.com/ge-timer-wh12x10255-ap3775089.html
« Last Edit: March 07, 2015, 04:52:17 PM by rockinrobin »

Offline gassmann

  • VIP Member
  • Member Since: Mar 2015
  • Posts: 2
Re: GE washer mdl# WJRR4170E1WW Multiple Problems
« Reply #2 on: March 07, 2015, 06:02:45 PM »
Thanks for the reply!  I did check that very thing before I ordered the timer. I installed it yesterday only to have the same problem. Can you tell me if maybe the pump failing to engage would cause the timer to run contiuously.  :thanks: