Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Runs for few seconds on fill and stops  (Read 2969 times)

Offline Rick

  • VIP Member
  • Member Since: Aug 2008
  • Posts: 1
Runs for few seconds on fill and stops
« on: August 11, 2008, 10:49:23 AM »

I have a Maytag front load that stops a few seconds after it starts its fill cycle. I can press the start button and it will start again, only to stop after a few seconds. HELP!

Model MAH4000AWW

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3023
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Runs for few seconds on fill and stops
« Reply #1 on: August 11, 2008, 01:45:54 PM »
Likely a bad motor control board. Remove the front panel and check the board physically for signs of scorched components or blown fuse (non-replaceable). Maytag has improved the new boards and they come line-protected and with a new quieter motor. You'll find the Neptune manual here on the download section for reference on how to open the machine, etc. There's also a nice tech sheet in the top console which will explain the test procedures. Order a 12002039 for the kit. Instructions included.



Part # 12002039 Motor - Drve, AP4010145


« Last Edit: August 12, 2008, 06:40:35 PM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com