Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Maytag MBR2258XES1 Control board replacement  (Read 2038 times)

Offline TPerkins

  • Technician
  • Member Since: Dec 2014
  • Posts: 83
  • Country: us
Maytag MBR2258XES1 Control board replacement
« on: December 11, 2014, 03:19:16 PM »

I have a Maytag MBR2258XES1 that we received without a control panel board in it. Ive ordered a new one and after installing it I am unable to adjust either the fridge or freezer control temps on the digital display. They both are reading 0.

Is there a reset or calibration that needs to be done when replacing this board?

Offline dab147315

  • Technician
  • Member Since: Oct 2010
  • Posts: 4392
  • Country: us
Re: Maytag MBR2258XES1 Control board replacement
« Reply #1 on: December 11, 2014, 03:31:33 PM »
Page 37 you have to program board. https://db.tt/e9X7focC
If i gave you a Tech Sheet or a Service Manual you just became a Appliance Technician!Proceed with Caution!

Offline dab147315

  • Technician
  • Member Since: Oct 2010
  • Posts: 4392
  • Country: us
If i gave you a Tech Sheet or a Service Manual you just became a Appliance Technician!Proceed with Caution!

Offline TPerkins

  • Technician
  • Member Since: Dec 2014
  • Posts: 83
  • Country: us
Re: Maytag MBR2258XES1 Control board replacement
« Reply #3 on: December 11, 2014, 04:13:05 PM »
Awesome. Thanx for the quick reply! I appreciate it.

Im new to appliance repair. Been repairing TV's for about 20 years, but my job is now asking me to repair appliances as well. We get alot of returns from a certain national big box store and I get to try and figure out what makes these new appliances tick.

Offline RAH52

  • Technician
  • Member Since: Aug 2008
  • Posts: 961
  • Country: ca
Re: Maytag MBR2258XES1 Control board replacement
« Reply #4 on: December 11, 2014, 08:23:08 PM »
The repair video above is a very slow way to get at the control board .I just pull the light cover off ,take a flat bladed screwdriver ,push on the clips and it folds right down .Remove the connectors and change the part .No need to unsnap the whole large assembly .