Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: 110.26752501 kenmore washer balance problem  (Read 1735 times)

Offline martzism

  • VIP Member
  • Member Since: Nov 2014
  • Posts: 1
110.26752501 kenmore washer balance problem
« on: November 21, 2014, 08:47:34 PM »

i need help narrowing down balance problem. during the spin cycle the tub tilts toward the right rear. all three suspension springs are in place and unbroken. the motor counterbalance spring is good. balance ring seems intact.

Offline rockinrobin

  • Technician
  • Member Since: Sep 2011
  • Posts: 486
  • Country: us
    • Buy me a beer through paypal
    • Ransom Mobile Appliance Repair Service
Re: 110.26752501 kenmore washer balance problem
« Reply #1 on: November 22, 2014, 05:25:07 PM »
I would replace the Counterbalance Spring (p/n W10250667) that attaches from left rear base to rear side of tub bracket to see if it resolves your issue.
If not then possibly the Upper & Lower Suspension Pads (p/n 285744 for lower pads and p/n 285219 for upper pads).
« Last Edit: November 22, 2014, 05:25:24 PM by rockinrobin »