Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Kenmore Ultra Wash II Model 6651675590  (Read 1475 times)

Offline Spit

  • VIP Member
  • Member Since: Nov 2014
  • Posts: 1
Kenmore Ultra Wash II Model 6651675590
« on: November 18, 2014, 04:30:02 PM »

I was having a problem with poor cleaning.  I did some checking and it appeared that the unit was not filling with enough water.  I replaced the fill valve and it seems like the water is entering the machine 2-3 times faster, and works much better.  this unit is 20 years old and seems to be in great shape.  I have read some posts on forums that seemed to indicate that these older machines actually clean better than some of the newer Energy Star models?  does anyone have an opinion on that?    I am wondering if there is anything that I should check in terms of debris being in the pump..and how I would go about doing that.  And I was wondering about the lower spray arm cap and the rubber cap on top of it.  How flexible should that rubber be how tight is it supposed to seal to the tube in the center of the lower rack.   Thanks  Spit