Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Kenmore / Whirlpool dishwasher - getting stuck in cycle  (Read 1513 times)

Offline EliteApplianceService

  • Technician
  • Member Since: Feb 2013
  • Posts: 36
  • Country: us
Kenmore / Whirlpool dishwasher - getting stuck in cycle
« on: March 07, 2014, 09:54:33 AM »

Kenmore dishwasher MOD# 665.13883K800 mfg by Whirlpool.  Unit will not advance after in main wash.  Checked heater / thermostat.  Replaced main control.  After replacing control, ran unit thru cycle.  Unit worked properly / heater came on / advanced thru cycle properly. After 2nd load, unit is back to its old tricks and not advancing again. Had customer try again on quick cycle (cycle that I tested in) still not working.  Any thoughts would be appreciated.  Thanks!

Offline EliteApplianceService

  • Technician
  • Member Since: Feb 2013
  • Posts: 36
  • Country: us
Re: Kenmore / Whirlpool dishwasher - getting stuck in cycle
« Reply #1 on: March 12, 2014, 06:55:42 PM »
Never-mind. Working properly.  Customer had less than a great ability to tell time.   Lost over an hour to prove me correct. 

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 10982
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Kenmore / Whirlpool dishwasher - getting stuck in cycle
« Reply #2 on: March 12, 2014, 06:57:58 PM »
 :cheers: