Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Washer Gearbox Knocking  (Read 3464 times)

Offline xfalcon1

  • VIP Member
  • Member Since: Jun 2008
  • Posts: 2
Washer Gearbox Knocking
« on: June 24, 2008, 09:46:39 PM »

My Washer Started Knocking as though the gearbox is hitting something, this is on start up of spin cycle.it seems it can't get past what ever its hitting.

iv'e read some other topics about washers and really don't belive its the Motor.
Is the Gear box something that goes out in these washers?
Any ideas?

Model WBSE2090A0WW

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3023
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: Washer Gearbox Knocking
« Reply #1 on: June 25, 2008, 06:05:10 AM »
Let's just say that gearbox failure on this machine is rare, and leave it there.

Nine times out of 10, noises are more likely to be caused by belt, pulley or clutch issues on this particular machine. Check the length of the drive belt to ensure that there are no notches worn in it. The spin clutch is attached to the motor, and is a replaceable part. Suggest you punch your model number into the parts lookup and have a good looksee at the breakdown. You understand that even though we are mostly experts here, we can't hear the noise for you and make a determination. With the front off of the machine, it should be fairly easy to narrow down the location of the sound.
« Last Edit: June 25, 2008, 06:07:48 AM by Repair-man »
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com