Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Frigidaiare Gallery Washer top load  (Read 1542 times)

Offline ladysouth770

  • VIP Member
  • Member Since: Aug 2013
  • Posts: 2
Frigidaiare Gallery Washer top load
« on: November 03, 2013, 12:27:10 PM »

Awhile back, the agitator was removed and now there is a clicking sound when the washer is running.  I think perhaps the feed dogs are not properly seated, but apparently I do not know how to do that.  Agitator has been removed and checked several times, all seems to fit correctly when in hand, but when put back in place, no!  The operating seems fine, except for the noise, I don't want a misfit to cause damage, if preventable.  Agitator turns manually, but not as easily as it did before, it's obvious that something is slipping. 

Any suggestions, clues, tips, etc.?  Many thanks.  Marie

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 10983
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Frigidaiare Gallery Washer top load
« Reply #1 on: November 03, 2013, 08:10:07 PM »
Could you post the model number for us?

Offline ladysouth770

  • VIP Member
  • Member Since: Aug 2013
  • Posts: 2
Re: Frigidaiare Gallery Washer top load
« Reply #2 on: November 04, 2013, 02:37:41 PM »
Frigidaire Washer - Model #GLWS1339CS1

Thank you.