Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: How remove Kenmore ice/water dispenser housing ??  (Read 8129 times)

Offline Marvster

  • VIP Member
  • Member Since: Aug 2007
  • Posts: 2
How remove Kenmore ice/water dispenser housing ??
« on: October 08, 2007, 04:02:11 PM »

I need to replace water dispenser 'spout' - it has delivery tube attached.  Have removed front panel and housing screws - housing appears to be glued or taped - prying not very effective.  Is there a safe way to dislodge the housing from the door.  Kenmore side-by-side 106.595829902.
Thanks in advance for any advice offered.........

Offline AJ

  • Technician
  • Member Since: Jun 2007
  • Posts: 10992
  • Country: us
    • - Appliance Repair
Re: How remove Kenmore ice/water dispenser housing ??
« Reply #1 on: October 09, 2007, 07:35:32 AM »
delivery tube?
Do you have a part number?

If this the tube that runs inside the freezer door?
If so the ones I have replaced all I did was remove the trim to get some extra room.
The tube should just pull in and out of the door.