Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: kenmore 110 s70 belt tensoin ?  (Read 2292 times)

Offline 4uzindian

  • VIP Member
  • Member Since: Sep 2009
  • Posts: 38
kenmore 110 s70 belt tensoin ?
« on: September 28, 2013, 10:08:37 AM »

kenmore washer 110 series 70 from 80's .what is the correct belt tension ?.also is tgere a diagram of this procedure any where onlie on how to do this..did not run machine fromm last post yet.will let know.

Offline theoldstoveguy

  • Technician
  • Member Since: Jan 2008
  • Posts: 1636
  • Country: us
    • Buy me a beer through paypal
Re: kenmore 110 s70 belt tensoin ?
« Reply #1 on: September 28, 2013, 01:32:11 PM »
From the rear loosen nut above motor until it moves. I use channel lock pliers and pull the motor to the left. Between the motor on the left and transmission pulley I have about 1/2" in and out play, in other words moves 1" back and forth.

Offline 4uzindian

  • VIP Member
  • Member Since: Sep 2009
  • Posts: 38
Re: kenmore 110 s70 belt tensoin ?
« Reply #2 on: September 28, 2013, 02:00:45 PM »
old soveguy  thanks for a quick response .i'll use this to adjust.thank you very much.

Offline viking351

  • VIP Member
  • Member Since: Jan 2009
  • Posts: 178
  • Country: us
Re: kenmore 110 s70 belt tensoin ?
« Reply #3 on: October 10, 2013, 05:01:58 PM »
if you need the belt i have plenty of them
reply to tommyp351@hotmail.com