UPDATE: Icemaker on Maytag Side By Side Problem Fixed - Factory PIN OUT WIRING WRONG!!!
Just wanted to give you a heads up. After my Buddy literally tried 7 Brand New Icemakers before calling me I finally found out why the Ice Maker was not making ice. Every New Icemaker that he tried and replaced was not getting power to the New Ice Maker Unit - I tried jumping it - tried to OHM it out etc...
The problem was the Wiring Harness going from the New Ice Maker to the Back Wall Molex connector. The Wiring Pin Out was incorrect from the factory Ice Maker Wiring Harness. The RED Wire WAS NOT wired to the RED Wire to the Molex Connector on the back wall along with the White Wire, Ground Green Wire etc... -- Had to remove all the wires from the back of the ice Maker Wiring Harness and totally rewire the Harness to Match the wiring coming from the back Molex Connector from the machine. After rewire the Ice Maker is KICKING OUT SOME ICE!!!
FYI - Don't assume the Wiring harness is suppose to Match up to your Machine. Check to make sure you match up the Male Molex connector Colors to the Female Molex Connector from the back of the Refrigerator because in my case it DID NOT!!!