Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Whirlpool Washer Jumping Around  (Read 1914 times)

Offline app1

  • Technician
  • Member Since: Aug 2011
  • Posts: 262
Whirlpool Washer Jumping Around
« on: July 15, 2013, 03:48:55 PM »

Hello, I am working on a Whirlpool Washer Model # WTW6600SW1 and it seems fine in spin and rinse but about half way through a wash cycle it begins to jump around and bang a little bit and then it shuts off and it looks like an error code of uL, I gues that would be unbalanced load? However, it has no clothes in it.. What am I looking at to fix this problem.. Thanks In Advance For Any Help!!!!

Offline Spannerwrench

  • Technician
  • Member Since: May 2012
  • Posts: 81
Re: Whirlpool Washer Jumping Around
« Reply #1 on: July 15, 2013, 05:44:43 PM »
Open the door and lift up on the inner basket, wiggle it around some and see if it shakes.  Make be a bad spinner, basket, bearing and outer drum.

Offline app1

  • Technician
  • Member Since: Aug 2011
  • Posts: 262
Re: Whirlpool Washer Jumping Around
« Reply #2 on: July 15, 2013, 06:26:19 PM »
Thanks Spannerwrench I will check that and somebody said maybe shocks or the balls on top? Not sure if that makes any sense but I will check the basket.. Thanks