Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Need schematic for microprecessor board on SE1000 maytag  (Read 2688 times)

Offline gp

  • VIP Member
  • Member Since: Jun 2013
  • Posts: 1
Need schematic for microprecessor board on SE1000 maytag
« on: June 17, 2013, 05:41:03 PM »

I have a se1000 maytag stackable.  i HAVE THE WIRING DIAGRAM AND THERE IS 26 AND 10VAC going into the board but no activity, just acts dead after sitting all winter in a summer cabin.  Anything I can try without the main board schematic? where could I find a replacement?
Many thanks,
gp

Offline theoldstoveguy

  • Technician
  • Member Since: Jan 2008
  • Posts: 1597
  • Country: us
    • Buy me a beer through paypal
Re: Need schematic for microprecessor board on SE1000 maytag
« Reply #1 on: June 17, 2013, 06:43:36 PM »
Clean the ribbon from the touch pad to the board. There was a test board to help diagnose but it's no longer made.