Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Fisher & Paykel MW059  (Read 2135 times)

Offline Specialist

  • Technician
  • Member Since: May 2012
  • Posts: 132
  • Country: gb
  • Electrical Appliance / Catering Equipment Engineer
    • Buy me a beer through paypal
Fisher & Paykel MW059
« on: May 18, 2013, 02:57:26 PM »

Hi Guy's: Got someone asking me about 1 of these machines, never seen 1 let alone worked on them. The fault description is that the machine went into & completed a spin cycle & then just stopped, now it won't do anything it just sits there & apparently the spin light is Pulsing not flashing.
Anyone got any ideas ?


Thanks: Andy
Let Us Fix It Properly.

Offline scoteddie

  • Technician
  • Member Since: Aug 2009
  • Posts: 21
  • Country: gb
Re: Fisher & Paykel MW059
« Reply #1 on: May 18, 2013, 05:58:35 PM »
think this unit is peculiar to australia and new zealand

Offline Specialist

  • Technician
  • Member Since: May 2012
  • Posts: 132
  • Country: gb
  • Electrical Appliance / Catering Equipment Engineer
    • Buy me a beer through paypal
Re: Fisher & Paykel MW059
« Reply #2 on: May 19, 2013, 03:00:28 AM »
Hi Eddie: Apparently there are a few in the UK around the London area etc & that's where this guy has moved from, Quite an expensive machine from all accounts.  Have a mate who had done quite a bit with them but he's pretty Ill at the moment & i'm not going to bother him about it, at 1 time I had a load of manuals for F & P stuff but the Pen drive they were on was in my Toolkit when it got nicked.

Have a vague recollection of this being something to do with a comms problem, but as i've never actually worked on 1 was hoping someone here might have better info than me.



Andy
« Last Edit: May 19, 2013, 03:05:12 AM by Specialist »
Let Us Fix It Properly.