Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Kenmore Washer fills but will not agitate, drain, or spin  (Read 3346 times)

Offline Statebanc

  • VIP Member
  • Member Since: Apr 2013
  • Posts: 1
  • Country: us
Kenmore Washer fills but will not agitate, drain, or spin
« on: April 22, 2013, 09:14:47 PM »

I have a Kenmore model # 110.22992103. It will fill but will not agitate, drain, or spin. I still hear the timer going. I already replaced the lid switch. Any ideas on what the problem might be?

Offline haroldsappliance

  • Technician
  • Member Since: Nov 2011
  • Posts: 683
  • Country: us
    • Appliance repair
Re: Kenmore Washer fills but will not agitate, drain, or spin
« Reply #1 on: April 23, 2013, 05:02:18 AM »
Check motor quick disconnect. Wiggle it it. Look for bad connection.

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: Kenmore Washer fills but will not agitate, drain, or spin
« Reply #2 on: April 23, 2013, 07:02:22 AM »
Verify the lid switch is making contact and sending the signal back to the timer.
Check the water pressure switch.
If both are OK,replace the timer.
Order through www.Repairclinic.com and return the part if it does not correct the problem.
Take a Kid fishing.