Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Samsung frontloader WF431AB - no fill error  (Read 2550 times)

Offline Johncanfixit

  • VIP Member
  • Member Since: Aug 2012
  • Posts: 6
Samsung frontloader WF431AB - no fill error
« on: April 08, 2013, 09:04:44 AM »

My Samsung WF431AB frontloader gives a 'nF' (no flll) error message after a while when in the program. I noticed it first when I tried the Heavy duty program on extra-hot with the steam buton on. I don't remember that I ever used this program without getting the error message. I checked the hot water hose, and the inlet screen, but both of those seem fine. Now I can not even use the 'rinse and spin' program, which uses cold water, also for the nF message one minute into the cycle. I removed the top of the washer and noticed a constant 'bzzz' sound, seemingly coming from the blue valve which leads to the cold main. Any ideas

Offline domain

  • Technician
  • Member Since: Nov 2012
  • Posts: 2610
  • Country: us
    • Buy me a beer through paypal
Re: Samsung frontloader WF431AB - no fill error
« Reply #1 on: April 08, 2013, 02:23:42 PM »
Sounds like your valve is operating from all that BUZZIN!! Remove hoses and check for good water flow and for clogged inlet screens FIRST. O0 O0
« Last Edit: April 08, 2013, 02:23:53 PM by domain »