Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Whirlpool Oven Shutoff during Clean cycle. Now Oven won't turn on.  (Read 2864 times)

Offline Wrangler07

  • VIP Member
  • Member Since: Mar 2013
  • Posts: 1
  • Country: us

We have Whirlpool Oven Model#GR450LXHQ2 Electric Smoothtop Range. It has the Selfclean, ConvectionBake, Accusimmer & Keepwarm  features. It has worked fine without any problems. During selfclean it shutoff/unlocked by itself w/approx 7-9 min left in cycle. Upon opening the oven door there was heat-but not blazing hot. Tried to turn oven/broiler on;Control Module went thru its regular cycle of digital temp350 showing, hit start,click, timer starts to count down for preheat, everything looks good but when you open even door-NO HEAT. Chkd Oven Temp Sensor w/multi meter; 1049ohms. I reset Clock/system, chkd all Trblshttng tips per manual. Installed New Oven Heat Element(Had one on hand)Still NO HEAT. Other than on the Cntrl Mdul, I can't see any fuses, switches,ect.., I chkd the pwr feed wires from Cntrl Mdul to Broil & Oven Elements w/Multmtr & no elect pwr is registrd during preheat cycle, even though you can hear the Cntrl Mdul Clicking in/out. The Ovens cooktopburners still work, even with the Cntrl Mdul removed. I inspected Cntrl Mdul & can't see any visible burns, areas of defection or that may have failed from the inside & are showing up visible. PLEASE help me to confirm what I think it may be & how I can fix it reasonably. Thank U