Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: One of 6 burners not igniting. Viking vdsc485  (Read 2204 times)

Offline Becker135

  • VIP Member
  • Member Since: Jan 2013
  • Posts: 1
One of 6 burners not igniting. Viking vdsc485
« on: January 20, 2013, 04:02:37 PM »

No spark from one of 6 igniters.  Would I be able to see evidence on the module if this one circuit is bad?  The other burner in line with this one lights, but continues to click after lighting.  The other 4 burners work fine.  One possible issue is that the long ground in the center of the cooktop is disconnected from whatever it is supposed to ground, and I can't locate the spade it plugs onto.  The eyelet is screwed into the back wall.  The ground from both left and right igniters are connected properly, so this may be an unrelated issue.  Any advice is appreciated.