Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: fault code f-70  (Read 3446 times)

Offline donsabol

  • Technician
  • Member Since: Dec 2011
  • Posts: 83
fault code f-70
« on: December 05, 2012, 03:29:56 PM »

mhwe300vw00  torn boot and fault code f-70  any help thank you

Offline Earl Dryer

  • Technician
  • Member Since: May 2008
  • Posts: 165
  • Country: us
Re: fault code f-70
« Reply #1 on: December 05, 2012, 06:47:17 PM »
I don't find that code BUT when you remove the top of the machine to access the boot to tub clamp you will see the tech sheet which will give those codes. My guess is that is the fault code saying you have a water leak,sensed by a moisture sensor on the bottom of the machine.

Offline tgoods

  • Technician
  • Member Since: Jul 2010
  • Posts: 1884
  • Country: us
    • Buy me a beer through paypal
Re: fault code f-70
« Reply #2 on: December 05, 2012, 08:54:08 PM »
Unplug the 3-wire plug at the top of the motor control unit.  If the code disappears, replace the MCU, W10384846. Of course, replace your door boot first so you don't kill your new MCU.

Offline AJ

  • Technician
  • Member Since: Jun 2007
  • Posts: 10977
  • Country: us
    • - Appliance Repair
Re: fault code f-70
« Reply #3 on: December 06, 2012, 07:14:19 AM »
I agree with tgoods,


If a Central Control Unit Heartbeat Failure is displayed, no communication is detected from the Central Control Unit to the User Interface.

Possible Causes/Procedure
1. Check for continuity of the User Interface harness.
2. Check wire harness connections to the User Interface and the Central Control Unit.
3. If the drum is not rotating, unplug the MCU from the CCU
(the MI3 or M13 connector). If the code disappears, replace the MCU. If the code does not disappear, replace the CCU.
4. Replace User Interface if drum is rotating.

I have attached a copy of the tech sheet.