Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: One for TheOldStoveGuy!  (Read 11414 times)

Offline theoldstoveguy

  • Technician
  • Member Since: Jan 2008
  • Posts: 1627
  • Country: us
    • Buy me a beer through paypal
Re: One for TheOldStoveGuy!
« Reply #20 on: November 23, 2012, 05:41:52 PM »

A lot of these burners were in fact "hand drilled"(egg beater type drill). If that is the case check to see if they are drilled evenly and straight. I have drilled very small holes between the openings after failure of all of air gas adjustments. Make sure the bottom panel is in place and door closed. I leave the broiler drawer cracked just enough to see.

Offline JADsvc1

  • Technician
  • Member Since: Feb 2012
  • Posts: 77
  • Country: us
  • 25 yrs Frigidaire/W-W/Electrolux svc mgr
Re: One for TheOldStoveGuy!
« Reply #21 on: November 24, 2012, 08:09:03 PM »
Thanks for the information. I'll have a closer look at the holes in that burner. I did have the broiler door open, so maybe that adversely affected the burner lighting operation. When it's lit, it does burn nicely.

Thanks again and take care,

Having is not always so desirable as wanting . . .