Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Maytag Neptune Washer - LR on display and no spin  (Read 7336 times)

Offline AJ

  • Technician
  • Member Since: Jun 2007
  • Posts: 10998
  • Country: us
    • - Appliance Repair
Maytag Neptune Washer - LR on display and no spin
« on: May 05, 2008, 07:00:37 PM »

Complaint: Display on the washer shows LR and the washer will not spin.

I removed the front of the washer and took a look at the clear glass fuse on the motor control board.
The fuse was bad. A bad fuse on the motor control board is a sure sign that this neptune washer needed to have the motor control board replaced.

Solution: Installed the new maytag neptune motor conversion kit, Part # AP4010145. This kit includes a new main drive motor and a new motor control board.

To give you a better idea of just what is included in the kit and what steps have to be taken to install it here is the Motor Conversion Kit Instruction Sheet.

This instruction sheet is included with every Maytag Neptune Washer Motor Kit, Part # AP4010145

Model MAH5500AWW
« Last Edit: May 05, 2008, 07:26:21 PM by AJ »