Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Kenmore washer, model 110-24632300, fills with water and then nothing...  (Read 7209 times)

Offline mmkscarter

  • VIP Member
  • Member Since: Oct 2012
  • Posts: 4

Washing the 3rd load of clothes, washer filled with water and nothing happened. Power supply is good. I have removed clothes and drained the tub. Now I have no idea where to begin.

Offline bigbuck

  • Technician
  • Member Since: Jan 2011
  • Posts: 956
  • Country: us
  • over 30 years repairing appliance
    • Buy me a beer through paypal
Re: Kenmore washer, model 110-24632300, fills with water and then nothing...
« Reply #1 on: October 01, 2012, 07:08:00 PM »
Did you check your lid switch?

Sent from my MB865 using Tapatalk 2


Offline mmkscarter

  • VIP Member
  • Member Since: Oct 2012
  • Posts: 4
Re: Kenmore washer, model 110-24632300, fills with water and then nothing...
« Reply #2 on: October 01, 2012, 07:22:05 PM »
How would I check it or would I just replace it to see if thats it? By the way thanks for your reply.

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8821
  • Country: us
  • Caregiver, DIYer
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Kenmore washer, model 110-24632300, fills with water and then nothing...
« Reply #3 on: October 02, 2012, 09:43:16 AM »
See if it clicks examine it for looseness or broken lid strike
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair

Offline mmkscarter

  • VIP Member
  • Member Since: Oct 2012
  • Posts: 4
Re: Kenmore washer, model 110-24632300, fills with water and then nothing...
« Reply #4 on: October 02, 2012, 10:09:13 AM »
JW,
Lid strike is good. The switch does seem to be pretty loose and no click. O0  When I press switch it doesn't have any spring back. It seems logical so I am going to replace the switch. I see the 2 screws from the top...do I have to remove the basket and tub or is it easier to access from the rear? :thanks:

Mike

Offline tgoods

  • Technician
    Moderator
  • Member Since: Jul 2010
  • Posts: 1858
  • Country: us
    • Buy me a beer through paypal

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8821
  • Country: us
  • Caregiver, DIYer
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair

Offline mmkscarter

  • VIP Member
  • Member Since: Oct 2012
  • Posts: 4
Re: Kenmore washer, model 110-24632300, fills with water and then nothing...
« Reply #7 on: October 04, 2012, 05:07:41 PM »
J.W. and TGood,
I just finished replacing the lid switch and a load is now washing. Thank you very much for your help and the video's showing the repair work were exce;;ent.

 :cheers: :2funny: :thanks:

Offline tgoods

  • Technician
    Moderator
  • Member Since: Jul 2010
  • Posts: 1858
  • Country: us
    • Buy me a beer through paypal
Re: Kenmore washer, model 110-24632300, fills with water and then nothing...
« Reply #8 on: October 04, 2012, 09:20:21 PM »
 O0