Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: maytag washer will not fill  (Read 2776 times)

Offline rbracelin

  • VIP Member
  • Member Since: Sep 2012
  • Posts: 1
maytag washer will not fill
« on: September 24, 2012, 08:45:17 PM »

I have a maytag MAH6700AWW washing machine, it starts to fill but then abruptly stops and flashes a code LE except the L has an extra line in the middle like an E with the top cut off.  Couln't find the code in the owners manual.  Thought there was a probem with the fill valve but I pulled it and tested it with 120 volts and it seemed to work fine.  Wondered if anyone at this website has any suggestions.  Much appreciated.

Offline AJ

  • Technician
  • Member Since: Jun 2007
  • Posts: 10991
  • Country: us
    • - Appliance Repair
Re: maytag washer will not fill
« Reply #1 on: October 08, 2012, 11:25:17 AM »
What did you end up finding wrong with your washer?
Get Two Free Stocks -

Join Robinhood and we'll both get a stock like Apple, Ford, or Facebook for free!

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8827
  • Country: us
  • Caregiver, DIYer
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: maytag washer will not fill
« Reply #2 on: October 08, 2012, 11:46:54 AM »
That type of error is a heater error on some washers. Does your washer have a heater that you know of?
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair