Get Answers to your Appliance Repair Questions

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Don't agitate or spin and error code E00  (Read 2715 times)

Offline knob

  • VIP Member
  • Member Since: Jul 2012
  • Posts: 2
Don't agitate or spin and error code E00
« on: July 27, 2012, 09:09:22 AM »

GE Front Load Washer Model Number WHDVH626F0WW
It will fill up with water and drain, but will not agitate or spin.
Should I replace the control board?

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8827
  • Country: us
  • Caregiver, DIYer
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Don't agitate or spin and error code E00
« Reply #1 on: July 27, 2012, 09:28:26 AM »
Did you look at the belt?
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair

Offline knob

  • VIP Member
  • Member Since: Jul 2012
  • Posts: 2
Re: Don't agitate or spin and error code E00
« Reply #2 on: July 27, 2012, 09:40:01 AM »
Not yet, where do I find the belt?
How do I tell if I need to replace the belt?

Offline bigbuck

  • Technician
  • Member Since: Jan 2011
  • Posts: 956
  • Country: us
  • over 30 years repairing appliance
    • Buy me a beer through paypal
Re: Don't agitate or spin and error code E00
« Reply #3 on: July 27, 2012, 09:42:44 AM »
Should be able to unscrew back panel to excess belt.

Sent from my MB865 using Tapatalk 2