Author Topic: Jenn-Air JES9750AAB Range Control panel numbers not working (Read 22616 times)

justinc25 · « **on:** July 16, 2012, 11:34:01 AM »

Hello Everyone,

I have a Jenn-Air JES9750AAB Grill top range that came with my house when we bought it 2 years ago.
My wife loves it, I hate it, though it was working perfect until last week, When the 0, and the 9 key stopped working.
I discovered this when I tried to bake a pizza, and couldn't set the oven to 400. I figured fine I'll set it to 388, and it will go to 390.
Tried to make a pizza again today, and now the 8 isn't working either. So we have the 8, 9, & 0 keys all don't work.
I was wondering if it might be dirty contacts, or something I can fix for little money ? Or Do I need a new stove ?
I have an old GE JBP67W glass top range, but it needs a new glass for the door. I may fix this and switch it for the Jenn-Air if the cost to repair is too prohibitive.
Atleast until we get taxes back next year when I can buy my wife a new $500 black GE Glass top. (The other one I have is white, and all my appliances are black)
Thanks in advance for all your help.

Justin

AJ · « **Reply #1 on:** July 16, 2012, 11:54:07 AM »

If the keypad/buttons has a ribbon cable that plugs into the control board you could try clean the end of the ribbon cable with a pencil eraser.
Sometimes the connection will oxidize over time and make a bad connection with the control board and just needs to be cleaned.

Other wise you would be looking at replacing the clock/control as it comes with the keypad/buttons.
Not a cheap part, here is the part list for model JES9750AAB

AJ · « **Reply #2 on:** July 16, 2012, 11:56:07 AM »

This topic shows the type of ribbon cable I'm talking about and how to clean it.
http://appliancejunk.com/forums/index.php?topic=9863.0

justinc25 · « **Reply #3 on:** July 16, 2012, 11:57:48 AM »

Thanks that's a good trick, I'll try that. If it doesn't work, I'm just gonna buy a new glass for the old stove. It's only $60 vs. $233 for the control panel.

Thanks Again,
Justin

AJ · « **Reply #4 on:** July 16, 2012, 12:03:36 PM »

Another option if that don't work is to see how much it would cost to get the oven control fixed at http://www.fixyourboard.com
That's who we got that little tip about cleaning the ribbon cable from.

If you buy a new glass for your other oven keep us in mind when shopping for parts.
We don't sell parts directly, but are affiliated with a couple great websites that do as this topic explains.
http://appliancejunk.com/forums/index.php?topic=4745.0

If you try cleaning the cable please let us know if it works for you or not.

justinc25 · « **Reply #5 on:** July 16, 2012, 01:25:28 PM »

Thanks for the info. I got my parts prices from repairclinic.com

AJ · « **Reply #6 on:** July 16, 2012, 01:42:39 PM »

tgoods · « **Reply #7 on:** July 16, 2012, 03:48:44 PM »

What will you do for venting if you replace your Jennair with a standard range?

justinc25 · « **Reply #8 on:** July 16, 2012, 05:34:34 PM »

I tried to clean the ribbon cable today, and it didn't help. I was looking online and I guess these stoves are known for faulty control pads, and control boards.
I'm going to switch it for my old stove. Thanks for all your help !

As for the venting, I'm going to remove the blower, and fill the hole with insulation, then repair the drywall.
As far as venting for the new stove, I already have a functional range hood in place.

tgoods · « **Reply #9 on:** July 16, 2012, 08:38:54 PM »

Quote

I already have a functional range hood in place.

Good, that's half the battle there. Only reason I ask is I get asked about replacing Jennairs all the time. Especially those old drop-ins with the tiny ovens (Everybody hates those). Most people forget to consider what to do about venting. You either have to get another downdraft or do some major project installing a vent hood.

justinc25 · « **Reply #10 on:** July 17, 2012, 08:40:00 AM »

Here's my current setup, well it was my current setup, I just sold the range for $100, And told the guy about the buttons on the pad.
I'm going to buy a GE Profile Stainless slide in today for $150.00
I'll post a pic after it's installed

AJ · « **Reply #11 on:** July 17, 2012, 08:59:19 AM »

Wow, how did you sell that so fast?

justinc25 · « **Reply #12 on:** July 17, 2012, 09:08:45 AM »

Gotta love craigslist

AJ · « **Reply #13 on:** July 17, 2012, 09:15:24 AM »

Quote from: justinc25 on July 17, 2012, 09:08:45 AM

Gotta love craigslist

We have some members that buy appliances off of craigslist to fix up and resell.
Would be funny if it happen to be someone we know that bought it from you.
It's a small world after all.

justinc25 · « **Reply #14 on:** July 17, 2012, 09:37:13 PM »

Yes it is a small world. I posted the ad up at 11:30 Last night, and got an Email at 12:00 asking if he could pick it up at 9:00 this morning. The guy who bought it already has another older Jenn Air that crapped out on him. His wife loves these things, so he bought mine for $100.00 and he's gonna change the panel for his wife.
I just bought a almost new GE Profile PS968SP2SS for $130.00 I looked it up on Lowes.com It is still being sold for $1979.00
I can't believe I got a basically new $2000.00 Stove for $30.00 I'm floored. What do you guys think of this model ??
Here's a pic of the new setup: I just had to cut the counter top a little bit to make it fit, as it is a little wider than the old one.

AJ · « **Reply #15 on:** July 17, 2012, 09:56:01 PM »

You only paid $30 for that one?!

Looks really nice!

justinc25 · « **Reply #16 on:** July 17, 2012, 11:05:00 PM »

Yup, this one was $130 - $100 for my old one
30 bucks net cost. Pretty sweet huh.
Thanks for your help

AJ · « **Reply #17 on:** July 17, 2012, 11:09:28 PM »

Quote from: justinc25 on July 17, 2012, 11:05:00 PM

Yup, this one was $130 - $100 for my old one
30 bucks net cost. Pretty sweet huh.
Thanks for your help

Awesome deal.

Bailey · « **Reply #18 on:** July 18, 2012, 06:15:01 PM »

Nice find. Did you ask why they were selling it?

justinc25 · « **Reply #19 on:** July 18, 2012, 06:40:15 PM »

The seller said that they just bought the house
And his wife had to have a gas stove.
He said it was big money because they had to run
A gas line, and get a bottle delivered. Then they needed
To have it all inspected. I think the previous owners
Replaced the appliances to help the house sell
faster.

Get Answers to your Appliance Repair Questions

Parts & Diagrams

Author Topic: Jenn-Air JES9750AAB Range Control panel numbers not working (Read 22616 times)